Brand | Manufacture/Co | HARDNESS RANGE | C.E.V. Typical Values |
Values for ROCKSTAR 450 | Thk: 10 – 20 | ||
BHN 400 | SSAB | 370-430 | 0.37 |
QUARD 400 | DUFERCO | 370-430 | 0.42 |
JFE EVERHARD 360LE | JFE STEEL CORPN. | 360-430 | 0.38 |
SUMIHARD K400 | SUMITOMO METALS | 400-440 | 0.46 |
ABRAZO 400 | TATA UK LTD. | 360-430 | 0.43 |
RAEX 400 | RUUKKI | 360-430 | 0.43 |
DILLIDUR 400V | DILLINGER HUTTE | 370-430 | 0.43 |
XAR 400 | THYSSEN KRUPP | 370-430 | 0.43 |
BRINAR 400 | ILSENBURGER GROBBLECH | 360-430 | 0.48 |
FORA 400 | INDUSTEEL | 360-430 | 0.48 |
HARDPLAST 380 | ISD HUTA | 360-430 | 0.56 |
NICRODUR 400 | ACRONI | 360-430 | 0.56 |
CREUSABRO 4800 | INDUSTEEL | 360-430 | 0.48 |
WELHARD 400 | NSC/JAPAN | 400-440 | 0.46 |
BIS Plate 320 | Bisalloy Steels Pty Ltd | 320-360 | 0.4 |
BIS Plate 400 | Bisalloy Steels Pty Ltd | 370-430 | 0.4 |
BIS Plate 450 | Bisalloy Steels Pty Ltd | 425-475 | 0.48 |
Rockstar 400 | Essar Steel India Ltd. | 370-430 | 0.45 |
Rockstar 450 | Essar Steel India Ltd. | 425-475 | 0.52 |
Rockstar 500 | Essar Steel India Ltd. | 450-540 | 0.6 |
Abrex 400 | NSSMC | 360-440 | 0.4 |
Abrex 450 | NSSMC | 410-490 | 0.5 |
Abrex 500 | NSSMC | 450-550 | 0.55 |
Abrex 600 | NSSMC | 550-650 | 0.73 |
Item | Abrasion Resistant Plate |
---|---|
Material | ROCKSTAR 450, SUMIHARD, BRINAR, DUROSTAT, DILLIDUR, JFE EVERHARD. |
Thickness | 3 - 200mm |
Width | 500 - 3000mm |
Length | 1000 - 12000mm |
Heat Treatment | N, Q+T |
Surface Paint | EP, PE, HDP, SMP, PVDF |
Plate | C | Si | Mn | P | S | Cr | Ni | Mo | B | CEV | CET |
thickness mm | max % | max % | max % | max % | max % | max % | max % | max % | max % | typv | typv |
3-(8) | 0.19 | 0.7 | 1.6 | 0.025 | 0.01 | 0.25 | 0.25 | 0.25 | 0.004 | 0.41 | 0.30 |
8-20 | 0.21 | 0.7 | 1.6 | 0.025 | 0.01 | 0.50 | 0.25 | 0.25 | 0.004 | 0.47 | 0.34 |
(20)-40 | 0.23 | 0.7 | 1.6 | 0.025 | 0.01 | 1.00 | 0.25 | 0.25 | 0.004 | 0.57 | 0.37 |
(40)-50 | 0.23 | 0.7 | 1.6 | 0.025 | 0.01 | 1.40 | 0.25 | 0.60 | 0.004 | 0.59 | 0.36 |
(50)-80 | 0.26 | 0.7 | 1.6 | 0.025 | 0.01 | 1.40 | 1.00 | 0.60 | 0.004 | 0.72 | 0.41 |
Grade | Mechanical Property | Charpy V Impact Test | |||
HADOX 450 | Yield | Tensile | Elongation | Degree | longitudinal |
Min Mpa | Mpa | Min % | -40 | J | |
1200 | 1400 | 10 | 40 |